Info: 'During the file transfer operation, the mainframe did not respond within the given timeout period.'
DITL_142.txt
Items: (6 entries)
0:
Bounds: x1=3, y1=1, x2=437, y2=276
Type: 0
Info: ''
1:
Bounds: x1=10, y1=9, x2=427, y2=45
Type: 8
Info: 'CTerm 2.2 is a shareware product. Please support the shareware concept and register your copy by sending $20 to:'
2:
Bounds: x1=116, y1=47, x2=320, y2=99
Type: 8
Info: 'Michael Niehaus733 Longmeadow Lane Apt. 8Findlay, OH 45840'
3:
Bounds: x1=10, y1=177, x2=414, y2=227
Type: 8
Info: 'If you have any problems, suggestions or comments about CTerm, please write to the above address, call the number below, or use electronic mail:'
4:
Bounds: x1=116, y1=228, x2=319, y2=268
Type: 8
Info: 'CIS: 73760,171Phone: 419-425-3032'
5:
Bounds: x1=10, y1=123, x2=424, y2=159
Type: 8
Info: 'For a copy of the latest version of CTerm, send $5 to the address above, or download the latest copy from Compuserve.'
DITL_141.txt
Items: (2 entries)
0:
Bounds: x1=236, y1=90, x2=294, y2=110
Type: 4
Info: 'OK'
1:
Bounds: x1=41, y1=7, x2=293, y2=80
Type: -120
Info: 'The Gestalt Manager is not present. To use this software, a more recent version of the System software is required. System 7 is recommended.'
DITL_140.txt
Items: (2 entries)
0:
Bounds: x1=278, y1=80, x2=338, y2=100
Type: 4
Info: 'OK'
1:
Bounds: x1=80, y1=3, x2=356, y2=73
Type: -120
Info: 'The configuration file that was found was created by an old version of this program. You will need to re-configure this software.'
DITL_139.txt
Items: (6 entries)
0:
Bounds: x1=25, y1=9, x2=57, y2=41
Type: -96
Info: ' '
1:
Bounds: x1=247, y1=79, x2=305, y2=99
Type: 4
Info: 'Cancel'
2:
Bounds: x1=83, y1=20, x2=204, y2=40
Type: -120
Info: 'Bytes Received:'
3:
Bounds: x1=82, y1=44, x2=203, y2=64
Type: -120
Info: 'Elapsed Time:'
4:
Bounds: x1=206, y1=19, x2=312, y2=39
Type: -120
Info: '0'
5:
Bounds: x1=207, y1=44, x2=312, y2=64
Type: -120
Info: '0:00'
DITL_138.txt
Items: (8 entries)
0:
Bounds: x1=263, y1=131, x2=323, y2=151
Type: 4
Info: 'OK'
1:
Bounds: x1=194, y1=131, x2=254, y2=151
Type: 4
Info: 'Cancel'
2:
Bounds: x1=59, y1=60, x2=214, y2=80
Type: 5
Info: 'Receive as ASCII'
3:
Bounds: x1=58, y1=82, x2=213, y2=101
Type: 5
Info: 'Receive with CR/LF'
4:
Bounds: x1=62, y1=31, x2=328, y2=48
Type: 16
Info: 'FILE(MEMBER)'
5:
Bounds: x1=59, y1=11, x2=217, y2=27
Type: -120
Info: 'File to Receive:'
6:
Bounds: x1=17, y1=14, x2=49, y2=46
Type: -96
Info: ' '
7:
Bounds: x1=58, y1=103, x2=213, y2=122
Type: 5
Info: 'Discard Line Feeds'
DITL_137.txt
Items: (7 entries)
0:
Bounds: x1=263, y1=127, x2=323, y2=147
Type: 4
Info: 'OK'
1:
Bounds: x1=194, y1=127, x2=254, y2=147
Type: 4
Info: 'Cancel'
2:
Bounds: x1=61, y1=66, x2=186, y2=86
Type: 5
Info: 'Send as ASCII'
3:
Bounds: x1=61, y1=86, x2=189, y2=105
Type: 5
Info: 'Send with CR/LF'
4:
Bounds: x1=63, y1=35, x2=337, y2=52
Type: 16
Info: 'FILE(MEMBER)'
5:
Bounds: x1=59, y1=14, x2=252, y2=31
Type: -120
Info: 'Data set to receive file:'
6:
Bounds: x1=17, y1=14, x2=49, y2=46
Type: -96
Info: ' '
DITL_136.txt
Items: (12 entries)
0:
Bounds: x1=0, y1=0, x2=31, y2=31
Type: 0
Info: ''
1:
Bounds: x1=31, y1=0, x2=62, y2=31
Type: 0
Info: ''
2:
Bounds: x1=62, y1=0, x2=93, y2=31
Type: 0
Info: ''
3:
Bounds: x1=0, y1=31, x2=31, y2=62
Type: 0
Info: ''
4:
Bounds: x1=31, y1=31, x2=62, y2=62
Type: 0
Info: ''
5:
Bounds: x1=62, y1=31, x2=93, y2=62
Type: 0
Info: ''
6:
Bounds: x1=0, y1=62, x2=31, y2=93
Type: 0
Info: ''
7:
Bounds: x1=31, y1=62, x2=62, y2=93
Type: 0
Info: ''
8:
Bounds: x1=62, y1=62, x2=93, y2=93
Type: 0
Info: ''
9:
Bounds: x1=0, y1=93, x2=31, y2=124
Type: 0
Info: ''
10:
Bounds: x1=31, y1=93, x2=62, y2=124
Type: 0
Info: ''
11:
Bounds: x1=62, y1=93, x2=93, y2=124
Type: 0
Info: ''
DITL_135.txt
Items: (2 entries)
0:
Bounds: x1=214, y1=65, x2=274, y2=85
Type: 4
Info: 'OK'
1:
Bounds: x1=67, y1=5, x2=279, y2=59
Type: -120
Info: 'An error occurred reading the configuration file. The default settings will be used.'
DITL_134.txt
Items: (2 entries)
0:
Bounds: x1=225, y1=62, x2=285, y2=82
Type: 4
Info: 'OK'
1:
Bounds: x1=77, y1=8, x2=286, y2=56
Type: -120
Info: 'An error occurred opening a communication session. Please try again.'
DITL_133.txt
Items: (2 entries)
0:
Bounds: x1=238, y1=60, x2=298, y2=80
Type: 4
Info: 'OK'
1:
Bounds: x1=7, y1=3, x2=317, y2=52
Type: 8
Info: 'An error occurred allocating the terminal window. Please check the application partition size.'
DITL_132.txt
Items: (2 entries)
0:
Bounds: x1=265, y1=77, x2=325, y2=97
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=12, x2=339, y2=69
Type: 8
Info: 'An error occurred creating the connection record. Please check your installation and/or memory partition.'
DITL_131.txt
Items: (2 entries)
0:
Bounds: x1=290, y1=69, x2=350, y2=89
Type: 4
Info: 'OK'
1:
Bounds: x1=76, y1=8, x2=359, y2=60
Type: 8
Info: 'No Connection Tools were found during the initialization of the Communications Toolbox. Please check your installation.'
DITL_130.txt
Items: (2 entries)
0:
Bounds: x1=268, y1=66, x2=328, y2=86
Type: 4
Info: 'OK'
1:
Bounds: x1=65, y1=7, x2=335, y2=55
Type: 8
Info: 'An error occurred initializing the Communications Toolbox. Please check to see if it has been installed correctly.'
DITL_129.txt
Items: (2 entries)
0:
Bounds: x1=227, y1=78, x2=285, y2=98
Type: 4
Info: 'OK'
1:
Bounds: x1=75, y1=7, x2=299, y2=78
Type: -120
Info: 'The Communications Toolbox is not installed. This application requires the Communications Toolbox.'
DITL_128.txt
Items: (4 entries)
0:
Bounds: x1=-1, y1=-2, x2=439, y2=255
Type: 0
Info: ''
1:
Bounds: x1=16, y1=41, x2=422, y2=154
Type: 8
Info: 'Asynchronous 3270 terminal emulation program for use with the IBM 3708, 3710 PA-8, 7171, or 9370 asynchronous protocol converters or any compatible converter.CTerm 2.2 is a shareware software product by Michael Niehaus.'
